HDB motor 3403HC30U14 86
Liên hệ để lấy báo giá
Mã sản phẩm:
Gọi ngay để đặt hàng (+84) 977.641.272
Mở cửa: (Từ 8h00 đến 21h00 hàng ngày)
CHI TIẾT SẢN PHẨM
1. HDB motor 3403HC30U14 86
HDB motor 3403HC30U14 86: stepper motor
Thông tin sản phẩm:
| project | parameter | |||
| Precision step angle | 1.2°/Step | |||
| Step angle accuracy | ±0.06°(full step without load) | |||
| Resistance accuracy | ±10% | |||
| Inductance accuracy | ±20% | |||
| Allow temperature rise | ＜80℃ (rated current, two-phase energization) | |||
| Ambient temperature | -20℃ ~ +50℃ (no icing) | |||
| environment humidity | Below 85% is below 40℃; below 57% is below 50℃ (no condensation) | |||
| Medium environment | No corrosive gas and dust. Do not directly contact with water, oil and other liquids | |||
| Protection level | IP43 | |||
| Insulation level | Class B (+130℃) | |||
| Insulation withstand voltage | AC 1000V 50/60Hz for one minute | |||
| Insulation resistance | DC 500V measured with a megger above 100Ω | |||
| Radial runout | 0.02 Max. (450gf) | |||
| Axial clearance | 0.08 Max. (450gf) | |||
| Radial displacement | 0.075mm.Max when 10N load is applied to the shaft end of the shaft | |||
| Axial displacement | 0.025mm.Max when 5N load is applied in the axial direction | |||
| motor model | Holding torque | Rated current | Body length | driver | |||
| Single axis | Dual axis | N·m | A/phase | mm (MAX) | Adaptation model | ||
| 34HC158U14 | 34HC158U14-2 | 2.26 | 5.8 | 69 | CSA858R | ||
| 34HC258U14 | 34HC258U14-2 | 4.18 | 5.8 | 98 | CSA858R | ||
| 34HC358U14 | 34HC358U14-2 | 6.78 | 5.8 | 126 | CSA858R | ||
| 34HC120U14 | 34HC120U14-2 | 2.26 | 2.0 | 69 | CSH2242R | ||
| 34HC223U14 | 34HC223U14-2 | 4.18 | 2.3 | 98 | CSH2242R | ||
| 34HC326U14 | 34HC326U14-2 | 6.78 | 2.6 | 126 | CSH2242R | ||
| 34HC430U14 | 34HC430U14-2 | 8.50 | 3.0 | 146 | CSH2242R | ||
HDB motor 3403HC30U14 86
